7
Replace 10kg ink tank (when the supply pipe is attached)
Do as follows when [INK END] or [INK NEAR END] is displayed on the sub-display.
When [INK END] is displayed
1
Press the [ENTER] key to cancel the message dis-
play.
• A message prompting ink replacement will be displayed.
2
Remove the supply pipe from the ink tank.
3
Remove the used ink tank.
• Be sure to wear the included safety glasses and gloves as there is a danger of ink splashing.
• When exchanging the ink tank, perform it after curing the surroundings with a waste etc. The surroundings become dirty with
ink dripping from the supply pipe.
• Ink tank has an expiry date. It is usable until the second month after the expiry date stated in the ink tank, but it will be unus-
able after 3 months. Replace the ink tank as soon as possible.
• Hook the removed supply pipe on the handle of the supply unit.
• If you want to use up the ink remaining in the ink tank,
refer to "Remaining ink replenishment" on page 10, and
then proceed to the next process.
Information
Please exchange ink tank
and ink IC
After replacing the ink IC,
ink supply is started.
(Time: about 3 minutes)
OK
Supply pipe
handle
hook
10kg ink tank
