10
3
Press the [ENTER] key on the 10kg ink supply
start screen to start supply.
When [INK NEAR END] is displayed
Very little ink remains in the bottle. Although the print operation can continue without replacing the ink bottle, the
ink may run out during the printing operation. We recommend that you replace the ink tank with a new one soon
after this is indicated.
If you press the key in local mode, you can check the replacement tank with the local guidance.
Remaining ink replenishment
1
Open the new ink and set the funnel in the spout.
2
Add the remaining ink.
3
If the ink is not completely added, print it in a new tank for a while, and after the
ink is low, add it again.
• This function can eliminate only the route using the 10kg ink
tank.
• The ink that can be replenished is limited to the ink that has undergone
"Maintenance" on page 12 on a regular basis.
• If maintenance is not performed properly, the color of the printed result may change due to the precipitation of ink
components.
• Cover the tank and shake it before adding.
• If ink leaks during replenishment, the floor may become dirty.
• Please be careful not to spill.
• If necessary, perform
"About ink level correction" on
Solve Ink End
Filling
Please wait
