background image

Foreword

2

Foreword

Congratulations on your purchase of “Soft Media Feeding Kit” for MIMAKI color ink jet printer .

DISCLAIMER OF WARRANTY

THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY  OR  FITNESS,  AND  MIMAKI  NEITHER  ASSUMES  NOR  AUTHORIZES  DEALER  TO  ASSUME
FOR  IT  ANY  OTHER  OBLIGATION  OR  LIABILITY  OR  MAKE  ANY  OTHER  WARRANTY  OR  MAKE  ANY  OTHER
WARRANTY IN CONNECTION WITH ANY PRODUCT WITHOUT MIMAKI’S PRIOR WRITTEN CONSENT.
IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR
LOSS OF PROFITS OF DEALER OR CUSTOMERS OF ANY PRODUCT.

On This Operation manual

• This  Operation  manual  is  describing  the  operations  and  maintenance  of  “Soft  Media  Feeding  Kit”  (called  as  this

machine hereafter)

• Read this Operation manual carefully and understand them thoroughly to use.
• It is also necessary to keep this Operation manual on hand.
• This Operation manual has been carefully prepared for your easy understanding, however, please do not hesitate to

contact a distributor in your district or our office if you have any inquiry.

• Descriptions contained in this Operation manual are subject to change without any notice for improvement.
• You can also download the latest manual from our website.

Requests

• This Operation manual has been carefully prepared for your easy understanding.

However, please do not hesitate to contact a distributor in your district or our office if you have any inquiry.

• Description contained in this Operation manual are subject to change without notice for improvement.

Reproduction of this manual is strictly prohibited.

All Rights Reserved.Copyright

© 2016 MIMAKI ENGINEERING Co., Ltd.

Summary of Contents for OPT-J0400














Reviews: