MIMAKI JV300-130 A, Installation Manual

Page: 15 / 60

© 2014 MIMAKI ENGINEERING CO.,LTD. 4.2 P.8
4.2 Assembling the Stands and the Device
R.1.0
1
2
3
4
5
6
7
16. Paste the roll holder position label .
17. Move roll holder to the center of the unit.
18. Check clamp lever is lowered.
When clamp lever is lifted, push it down.
19. Move roll holder to the roll setting position.
Roll Holder
Set Position
3 Inch Roll Media
2 Inch Roll Media
20mm
23mm
Roll Holder position
label
Roll Holder
Set Position
3 Inch Roll Media
2 Inch Roll Media
Basis
Setting position of 3inch tube
Setting position of 2inch tube
Roll Holder
Roll Holder Side (Back of the unit)
Roll Holder
Set Position
3 Inch Roll Media
2 Inch Roll Media
Set the base position of the
roll holder within this range.
INSTALLATION GUIDE > Printer Assembly > Assembling the Stands and the Device
Model JV300
Issue 2014.04.11 Revised
F/W ver. 1.00 Remark
1.0
Rev.