MIMAKI JV3-130 SP II Page 99 Operation Manual Download

Page: 99 / 144

- 5.11 -

If nozzles are clogged even after the cleaning function is executed

If nozzle clogging is resolved after HEAD CLEANING (

page 2.21) and NOZZLE WASH

(

page 3.7) perform the following functions.

FILL UP INK :

The device is charges ink.

HEAD WASH :

Cleans the head, tube, and damper with the dedicated cleaning fluid (option).

[FILL UP INK]

Select the [FILL UP INK].

Press the [ENTER] key.

Filling of ink is started automatically.

When filling of ink is completed, the menu

returns.

Press the [END] key twice.

Tthe menu returns to the LOCAL mode.

[HEAD WASH]

• The washing liquid is separately available from your local distributor.

Select the [HEAD WASH].

Press the [ENTER] key.

Take out the ink cartridge.

Filled ink will be discharged.

MAINTENANCE
FILL UP INK

< ent >

FILL UP

∗

−

MAINTENANCE
FILL UP INK

< ent >

< LOCAL >

width : 1272 mm

MAINTENANCE
HEAD WASH

< ent >

WASH

REMOVE CARTRIDGE

TWICE

Summary of Contents for JV3-130 SP II

















































































































































Search results

Summary of Contents for JV3-130 SP II

Reviews:

Related manuals for JV3-130 SP II

Brands by name

Popular brands

MIMAKI JV3-130 SP II, Operation Manual

Search results

Summary of Contents for JV3-130 SP II

Reviews:

Related manuals for JV3-130 SP II

Brands by name

Popular brands