MIMAKI JV3-130 SP II, Operation Manual

Page: 78 / 144

- 4.4 -
Function mode
The FUNCTION mode consists of 16 items.
The 16 items can be registered for each of the following four types.
If the type has been registered for each media type, it becomes easy to change plotting conditions
when the media type is changed.
Example) Type1 : For Tarpaulin 1
Type2 : For Tarpaulin 2
Type3 : FF
Type4 : PVC
Registering a type
1. Make sure that the mode is LOCAL mode.
2. Press the [FUNCTION] key.
3. Press the [ENTER] key.
4. Select any of Types 1 through 4 by pressing
the JOG keys [ ] and [ ].
5. Press the [ENTER] key.
Setting Plotting conditions.
page 4.5
Changing the type
If plotting conditions for types 1 through 4 have already been registered, settings can be selected
according to the plotting simply by selecting the type.
1. Perform steps 1 through 5 above.
Select a type.
2. Press the [END] key.
Plotting with the plotting condition registered for the selected
type is possible.
< LOCAL >
Width : 1272 mm
FUNCTION
SET UP
< ENT >
SET UP
SELECT
: TYPE . 1
SET UP
SELECT
: TYPE . 2
TYPE . 1
MEDIA COMP.
< ent >
TYPE . 1
MEDIA COMP.
< ent >