manualshive.com logo in svg

MIMAKI CF-0907, Instruction Manual

The MIMAKI CF-0907 offers precision cutting for all your creative projects. Unlock its full potential with the Instruction Manual, available for free download from our website. Explore the functionality and features of this cutting-edge device and unleash your creativity like never before.

Share
Download
background image

— A.18 —

Filter unit

The media inside the filter unit is removable, and needs to be cleaned at regular intervals.

1.

Remove the filter unit by holding both sides.

2.

Separete the media from the filter cover.

3.

Vacuum the dust from the media.

4.

Put the media back in place.

5.

Set the filter unit with both hands.

Hang the top part in place, and fit both side poperly.

Make sure the side of the filter cover with the shorter projection is at the top.

Summary of Contents for CF-0907











































































































































































Reviews:

No comments

Related manuals for CF-0907

Roland LEC-300 User Manual preview
LEC-300
Brand: Roland Pages: 150
MIMAKI CJV30 Series Maintenance Manual preview
CJV30 Series
Brand: MIMAKI Pages: 316

Brands by name

Popular brands

Load more brands