Milwaukee PD 705, Original Instructions Manual

Page: 12 / 66

10
GB GB
English
TECHNICAL DATA
Percussion Drill
PD 705
Production code 4319 56 01...
4319 71 01...
... 000001-999999
Rated input 705 W
Output 355 W
No-load speed 0-3000 min -1
Speed under load max. 0-1890 min
-1
Rate of percussion under load max. 0-48000 min -1
Static jamming moment * 15 Nm
Drilling capacity in concrete 15 mm
Drilling capacity in brick and tile 16 mm
Drilling capacity in steel 13 mm
Drilling capacity in wood 30 mm
Drill chuck range 1,5-13 mm
Drive shank 1/2” x 20
Chuck neck diameter 43 mm
Weight according EPTA-Procedure 01/2003 1,9 kg
Noise/Vibration Information
Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
Wear ear protectors!
99,0 dB (A)
110,0 dB (A)
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
Drilling into metal
Uncertainty K =
5,6 m/s
2
1,5 m/s
2
Impact drilling into concrete
Uncertainty K =
12,6 m/s
2
1,5 m/s
2
* Measured according to Milwaukee norm N 877318
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS FOR DRILLS
Wear ear protectors when impact drilling.
Exposure to noise
can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when perfor-
ming an operation where the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a
„live“ wire may make exposed metal parts of the power tool „live“
and could give the operator an electric shock.
Appliances used at many different locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.