5
1
2
5. Allow machine to come to full speed before con-
tacting work surface.
6. Slowly lower depth adjustment handle (3) to enter
the cut. Insert the wheel into the work surface only
to the depth necessary to make the desired cut.
3
7. Once depth of cut is set, return both hands to the
push handle.
8. Slowly push the cart forward in a straight line.
WARNING!
Be wary of kickback forces, flexing of
the wheel, or contact with foreign objects; these
can cause the operator to lose control of the cart
and/or the wheel to shatter. Monitor the water
supply during use.
9. To stop the cut-off machine, release the throttle
lever. Allow wheel to come to a complete stop
before removing wheel from the cut.
10. Close the water supply line to the machine.
11. Raise depth adjustment handle to move the wheel
above work surface.
MAINTENANCE
WARNING
To reduce the risk of injury, always
remove the machine and all acces-
sories before performing any maintenance.
Contact a
MILWAUKEE®
service facility for
ALL repairs.
Maintaining Cart
Start a regular maintenance program to keep your
cart in good repair. Inspect your cart for issues
such as undue noise, misalignment or binding of
moving parts, breakage of parts, or any other condi-
tion that may affect
the operation. Return cart to a
MILWAUKEE®
service facility for repair.
Cleaning
Keep handles clean, dry and free of oil or grease.
Use only mild soap and a damp cloth to clean, since
certain cleaning agents and solvents are harmful to
plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia.
Never use flammable
or combustible solvents around
machines.
Storage
Remove battery from machine and water from tank
before storing. The push handle can be folded for-
ward for compact storage.
Repairs
For repairs, return the cart to the nearest service
center.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com.au / www.milwaukeetool.co.nz
or contact a distributor.
M18
TM
Switch Tank Compatibility
The
cart
is
compatible
with
MILWAUKEE®
M18
TM
Switch Tank
15 Litre
Backpaack Water Supply Kit (M18BPFPWS-0).
1. Remove the water supply tank mount from cart
stem by removing the two bolts (1).
2.
Install the M18
TM
Sprayer mounting bar to cart
stem using the same two bolts (2).
3.
Remove the sprayer waist straps and place the
sprayer onto the mounting bar.
1
2
4. Wrap extra hose length as
shown and secure with strap
to cart's hoist ring.
5. To use during cut-off opera-
tions, follow all instructions
and warnings provided with
the sprayer and cut-off ma-
chine.
