3
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
explosion or risk of injury.
•
excessive temperature.
-
perature above 130°C (265°F) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
Charging im-
SERVICE
•
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
HOLE HAWG
™
Safety Instructions for all operations
• Use auxiliary handle(s).
Loss of control can cause
personal injury.
•
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give
the operator an electric shock.
Safety Instructions when using long drill bits
•Never operate at higher speed than the maximum
speed rating of the drill bit.
At higher speeds, the
bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the bit
tip in contact with the workpiece.
At higher speeds,
the bit is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
• Apply pressure only in direct line with the bit
and do not apply excessive pressure.
Bits can
bend causing breakage or loss of control, resulting in
personal injury.
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use a suitable dust
extraction solution in accordance with the
solution’s operating instructions.
• Always use common sense and be cautious when
using tools.
It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact
MILWAUKEE®
Tool or a
trained professional for additional information or
training.
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact a
MILWAUKEE®
service facility for a
replacement.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
SPECIFICATIONS
Cat. No. .............................................. M18 CRAD2
Volts............................................................18V DC
Battery Type .................................................M18™
Charger Type ................................................M18™
No Load RPM .............................................. 0-1500
Recommended Ambient
Operating Temperature ................... -17°C to 51°C
Capacities:
Steel
Twist Bit ......................................... 8mm (5/16")
Wood
Ship Auger Bit ............................. 32mm (1-1/4")
Selfeed Bit ................................ 65mm (2-9/16")
Hole Saw .........................................101mm (4")
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
V
ADDITIONAL BATTERY SAFETY RULES
WARNING
To reduce the risk of fire,
personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid
to flow inside them. Corrosive or conductive fluids,
such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
WARNING
Do
not charge
non-rechargeable batteries.