background image

2

WORK AREA SAFETY

• 

Keep work area clean and well lit. 

Cluttered or 

dark areas invite accidents.

• 

Vacuums have motors and other parts that can 

produce sparks during normal use. 

Do not use 

within 30 feet of areas where explosive materials 

may be present (such as gasoline pumps and places 

where liquids like paint thinners, cleaners, solvents, 

etc. are stored). 

• 

Do not use in the presence of explosive dust, 

liquids or vapors.

• 

Do not use where oxygen or anesthetics are used.

• 

Do not allow to be used as a toy. 

Close attention 

is necessary when used by or near children. 

• 

Use extra care when using on stairs.

ELECTRICAL SAFETY

• Do not handle battery packs or vacuum with wet 

hands.

PERSONAL SAFETY

• 

STAY ALERT.

 Watch what you are doing and use 

common sense. Do not use vacuum when you are 

tired,  distracted  or  under  the  influence  of  drugs, 

alcohol or medication causing diminished control.

• 

The operation of a vacuum can result in foreign 

objects being blown into eyes, 

which can result in 

eye damage. Always wear safety goggles or glasses 

with side shields when operating vacuum.

• 

Wear a dust mask or use an OSHA compliant 

vacuum solution

 when working in dusty situations. 

Dust particles can harm your lungs.

• 

Avoid accidental starting. Ensure the switch is in 

the off-position before inserting battery packs. 

Inserting battery packs in vacuum that has the switch 

on invites accidents.

• 

Do not overreach. Keep proper footing and bal

-

ance at all times. 

This enables better control of the 

vacuum in unexpected situations.

• 

Keep hair, loose clothing, fingers, and all parts 

of body away from openings and moving parts. 

• 

Use only as described in this manual. 

Use only 

manufacturer’s recommended attachments.

• 

Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery packs, picking up or carry

-

ing the tool.

 Carrying power tools with your finger 

on the switch or energizing power tools that have 

the switch on invites accidents.

VACUUM USE AND CARE

• 

Do not use without dust cannister and/or filter 

in place.

• 

Do not use to pick up flammable or combustible 

liquids

 such as gasoline or use in areas where they 

may be present.

• 

Do not pick up anything that is burning or smok

-

ing

 such as cigarettes, matches, or hot ashes.

• 

Do not pick up soot, cement, plaster or drywall 

dust without filter in place.

 These are very fine 

particles  that  may  affect  the  performance  of  the 

motor or be exhausted back into the air.

• 

This product is suitable for collection of silica 

dust when used in accordance with these in-

structions. To reduce the risk of health hazards 

from other vapors or dust, do not vacuum 

carcinogenic, toxic or hazardous materials

 

such as asbestos, arsenic, barium, beryllium, lead, 

pesticides or other health endangered materials.

• 

Use special care when emptying heavily loaded 

tanks.

• 

To avoid spontaneous combustion, empty dust 

box after each use.

• 

Do not leave vacuum unattended when battery 

packs are installed.

 Remove battery packs when 

not in use and before servicing.

• 

Disconnect the battery packs from the appliance 

before making any adjustments, changing ac

-

cessories, or storing appliance.

 Such preventive 

safety measures reduce the risk of starting the ap-

pliance accidentally.

• 

Do not put any object into openings. 

Do not use 

with any opening blocked; keep free of dust, lint, 

hair, and anything else that may reduce air flow.

• 

Maintain vacuum. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may affect the vacuum's 

operation. If damaged, have the vacuum repaired 

before use. 

Many accidents are caused by poorly 

maintained tools.

BATTERY TOOL USE AND CARE

• 

Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used 

with another battery pack.

• 

Use power tools only with specifically designated 

battery packs. 

Use of any other battery packs may 

create a risk of injury and fire.

• 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, coins, 

keys, nails, screws or other small metal objects, 

that can make a connection from one terminal 

to another. 

Shorting the battery terminals together 

may cause burns or a fire. 

• 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact ac

-

cidentally  occurs,  flush  with  water.  If  liquid 

contacts eyes, additionally seek medical help. 

Liquid ejected from the battery may cause irritation 

or burns.

• 

Do not use a battery pack or tool that is dam

-

aged or modified. 

Damaged or modified batteries 

may exhibit unpredictable behavior resulting in fire, 

explosion or risk of injury.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

WHEN USING AN ELECTRICAL VACUUM, BASIC 

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, IN-

CLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING 

VACUUM. BEFORE USING THE VACUUM, READ THIS OPERATOR’S MAN-

UAL, BATTERY PACK AND CHARGER OPERATOR’S MANUALS, AND ALL 

LABELS ON THE VACUUM, BATTERY PACK, AND CHARGER.  FAILURE  TO  

FOLLOW  THE  WARNINGS  AND  INSTRUCTIONS  MAY  RESULT  IN  ELEC-

TRIC SHOCK, FIRE AND/OR SERIOUS INJURY.

Summary of Contents for M18 FUEL 0920-20





























Reviews: