Milwaukee M18 FOPH-LTA, Original Instructions Manual

Page: 8 / 11

15 14
M18 FOPH-LTA
....................................4697 85 02...
...000001-999999
...................................0-4900 min
-1
...................................0-6200 min -1
...... 7,6m x 2mm / 6,1m x 2,4 mm
........................................400 mm
..........................................18 V
.........................................1,7 kg
..........................................79 dB(A)
..........................................93 dB(A)
.........................................7,5 m/s
2
.........................................2,5 m/s 2
Keep bystanders, children and pets 15m away from the area
of operation. Stop the product if anyone enters the area.
Keep the cutting attachment below waist level.
Keep hands and feet away from the cutting means at all
times and especially when switching on the motor.
Beware, the cutting elements continue to rotate after the
motor is switched off .
Beware of objects thrown by the cutting means. Clear debris
like small stones, gravel and other foreign objects from the
work area before starting operation. Wires or string may
become entangled with the cutting means.
The small blade fi tted to the lawn guard is designed to trim
the new extended line to the correct length for safe and
optimum performance. It is very sharp, do not touch it
particularly when cleaning the product.
Make sure the cutting head attachment is properly installed
and securely fastened.
Make sure all guards, defl ectors, and handles are properly
and securely attached.
Do not modify the product in any way, this may increase the
risk of injury to yourself or others.
Use only the manufacturer’s replacement cutting line. Do
not use any other cutting attachment.
Do not use metallic cutting means
Immediately switch off and remove the battery pack in the
event of accident or breakdown. Don’t operate the product
again until it has been fully checked by an authorised
service centre.
Ensure that the cut-off blade is properly positioned and
secured before each use.
Before use and after any impact, check that there are no
damaged parts. A defective switch or any part that is
damaged or worn should be properly repaired or replaced
by an authorised service facility.
Never operate the product unless all guards, defl ectors, and
handles are properly and securely attached.
Consider the environment in which you are working. Keep
the working area free from wires, sticks, stones, and debris
which if struck by the cutter can become thrown objects.
Maintenance and storage
Remove the battery before carrying out maintenance or
cleaning work.
Use only the manufacturer’s recommended replacement
parts and accessories (see page 15).
Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
When not in use, store the machine out of the reach of
children.
Never fi t a metal replacement line.
Stop the product and allow it to cool before storing or
transporting.
Clean all foreign material from the product. Store it in a cool
dry and well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden chemicals
and de-icing salts. Do not store outdoors.
For storage, always remove the battery.
For transportation, secure the product against movement or
falling to prevent injury to persons or damage to the product.
ADDITIONAL SAFETY INSTRUCTIONS
Never allow children, persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge or people unfamiliar with
these instructions to use the machine,
local regulations may restrict the age
of the operator.
Remove the battery pack before
starting any work on the machine.
Do not dispose of used battery packs
in the household refuse or by burning
them. Milwaukee Distributors off er to
retrieve old batteries to protect our
environment.
Do not store the battery pack together
with metal objects (short circuit risk).
Use only System M18 chargers for
charging System M18 battery packs.
Do not use battery packs from other
systems.
Battery acid may leak from damaged
batteries under extreme load or
extreme temperatures. In case of
contact with battery acid wash it off
immediately with soap and water. In
case of eye contact rinse thoroughly
for at least 10 minutes and
immediately seek medical attention.
RESIDUAL RISK
Even when the product is used as
prescribed, it is still impossible to
completely eliminate certain residual
risk factors. The following hazards may
arise in use and the operator should
pay special attention to avoid the
following:
• Injury caused by vibration
Hold the product by designated
handles and restrict working time and
exposure.
• Exposure to noise can cause hearing
injury
ENGLISH ENGLISH
TECHNICAL DATA CORDLESS LINE TRIMMER
Production code.....................................................................
No-load speed, low speed .....................................................
No-load speed, high speed....................................................
Cutting line ø max..................................................................
Cutting capacity max. ............................................................
Battery voltage.......................................................................
Weight according EPTA-Procedure 01/2014 .........................
Noise/vibration information
Measured values determined according
to EN 50636 / EN ISO 4871.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))....................
Sound power level (Uncertainty K=3dB(A)) ........................
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 50636.
Vibration a
h
.........................................................................
Uncertainty K= ....................................................................
WARNING Read these instructions carefully, be
familiar with the controls and the proper use of the
machine. Save all warnings and instructions for future
reference.
LINE TRIMMER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the controls
and the correct use of the machine.
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions to
use the machine, local regulations may restrict the age of
the operator.
Keep in mind, that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Preparation
Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
Never operate the machine while people, especially
children, or pets are nearby.
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of falling
objects, head protection must be worn.
Hearing protection may restrict the operator’s ability to hear
warning sounds, pay particular attention to potential hazards
around and inside the working area.
Wear heavy long trousers, boots, and gloves. Do not wear
loose fi tting clothing, short trousers, jewellery of any kind, or
use with bare feet.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Operation
Keep supply and extension cords away from cutting means.
Wear eye protection and stout shoes at all times while
operating the machine.
Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
Use the machine only in daylight or good artifi cial light.
Never operate the machine with damaged guards or shields
or without guards or shields in place.
Switch on the motor only when the hands and feet are away
from the cutting means.
Always remove the battery
- whenever the machine is left unattended
- before clearing a blockage
- before checking, cleaning or working on the machine;
- after striking a foreign object;
- whenever the machine starts vibrating abnormally.
Take care against injury to feet and hands from the cutting
means.
Always ensure that the ventilation openings are kept clear of
debris.
Avoid using on wet grass.
Do not walk backwards when using the product.
Do not operate the product when there is a risk of lightning.
Do not expose the product to rain or wet conditions. Water
entering an appliance will increase the risk of electric shock.
For technical data and approvals of application heads for use on various powerbases please refer to the operating instructions
of the used application head.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60335-1 / EN 50636-2-91 and may be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.