SERVICE
•
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
RATCHETS
• Do not use a battery pack or tool that is damaged or
risk of injury.
•
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
Charging im-
•
• Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring.
Fasteners contacting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
•
• lead from lead-based paint
•
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing, contact
a
MILWAUKEE
®
service facility for a replacement.
WARNING
Some dust
sawing, grinding,
creat
drilling,
ed by power sanding,
and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
SYMBOLOGY
FUNCTIONAL DESCRIPTION
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Lock Switch
1. Paddle switch
2. Lock switch
3. LED
4. 3/8" square drive anvil
5. Forward/reverse toggle
6. Fuel gauge
7. Handle
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
Always use common sense and be cautious
when using tools. I
t is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
MILWAUKEE
®
Tool or a trained professional for
additional information or training.
ADDITIONAL BATTERY SAFETY RULES
WARNING
WARNING
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
batteries.
SPECIFICATIONS
Cat. No. .............................................. M12 FHIR38
RPM
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
.
0 - 450
Torque Range ........................................ 0-47.5 Nm
Square Drive Anvil ............................................ 3/8"
Volts........................................................... 12V DC
Battery Type .................................................M12™
Charger Type................................................M12™
Recommended Ambient
Operating Temperature ......................-17°C to 51C
4
5
6
7
3
2
1
3
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Read operator’s manual.
