Milwaukee K900 S, Original Instructions Manual

Page: 11 / 39

20 21
K950 K K950 S
..................... 4171 25 01... .............4171 57 01...
..................... 4171 35 01... .............4171 61 01...
..................... 4171 43 01... .............4171 63 01...
...000001-999999 ...000001-999999
.......................1700 W .........................1700 W
.........................850 W ...........................850 W
..................125-250 min
-1
................125-250 min
-1
..................125-250 min
-1
................125-250 min
-1
................975-1950 min
-1
..............975-1950 min
-1
...........................20 J ...............................20 J
......................28-50 mm .....................28-50 mm
......................50-80 mm .....................50-80 mm
....................45-150 mm ...................45-150 mm
........................ 11,8 kg ..........................11,8 kg
.........................100 dB (A)
......................... 111 dB (A)
........................12,5 m/s
2
.......................12,5 m/s
2
.............................2 m/s
2
............................2 m/s
2
........................... 11 m/s
2
..........................11 m/s
2
.............................2 m/s
2
............................2 m/s
2
K900 K K900 S
..................... 4427 82 01... .............4427 79 01...
..................... 4171 45 01... .............4171 67 01...
..................... 4171 50 01... .............4171 71 01...
..................... 4171 55 01... .............4171 73 01...
..................... 4171 53 01...
...000001-999999 ...000001-999999
.......................1600 W .........................1600 W
.........................800 W ...........................800 W
................975-1950 min
-1
..............975-1950 min
-1
...........................20 J ...............................20 J
........................ 11,0 kg ..........................11,0 kg
...........................94 dB (A) ......................94 dB (A)
.........................102 dB (A) ....................102 dB (A)
.........................105 dB (A) ....................105 dB (A)
........................... 11 m/s
2
..........................11 m/s
2
.............................2 m/s
2
............................2 m/s
2
ENGLISH
TECHNICAL DATA
Production code .......................................................................
..............................................................................................
..............................................................................................
Rated input ..............................................................................
Output ......................................................................................
No-load speed .........................................................................
Speed under load max. ...........................................................
Rate of percussion under load max. ........................................
Impact energy per stroke according to EPTA-Procedure 05/2009 ....
Drilling capacity in concrete .....................................................
Tunnel bit in concrete, bricks and limestone ...........................
Core cutter in concrete, bricks and limestone .........................
Weight according EPTA-Procedure 01/2003 ...........................
Noise Information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) .......................................
Sound power level (K = 3 dB(A)) ............................................
Wear ear protectors!
Vibration Information
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
h
:
Hammer-drilling in concrete: ...................................................
Uncertainty K = .......................................................................
Chiselling: ...............................................................................
Uncertainty K = .......................................................................
TECHNICAL DATA
Production code .......................................................................
..............................................................................................
..............................................................................................
..............................................................................................
..............................................................................................
Rated input ..............................................................................
Output ......................................................................................
Rate of percussion under load max. ........................................
Impact energy per stroke according to EPTA-Procedure 05/2009 ....
Weight according EPTA-Procedure 01/2003 ...........................
Noise Information
Typically the A-weighted sound pressure level of the
tool is .......................................................................................
Measured values determined according to 2005/88/EG at the user’s ear.
2005/88/EC: Conformity assessment procedure according to
Annex VI.
Notified Body:
VDE Testing and Certification Institute, Merianstr. 28,
63069 Offenbach, Germany
Measured sound power level ................................................
Guaranteed sound power level .............................................
Wear ear protectors!
Vibration Information
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
h
:
Chiselling: ...............................................................................
Uncertainty K = .......................................................................
ENGLISH
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors. Exposure to noise ca n cause
hearing loss.
Use auxiliary handles supplied with the tool.
Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a „live“ wire may make exposed metal
parts of the power tool „live“ and could give the operator an
electric shock.
Appliances used at many different locations including open
air should be connected via a residual current device of
30 mA or less.
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes
and apron.
Sawdust and splinters must not be removed while the
machine is running.
Always disconnect the plug from the socket before carrying
out any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
When working in walls ceiling, or floor, take care to avoid
electric cables and gas or waterpipes.
The dust produced when using this tool may be harmful to
health. Do not inhale the dust. Wear a suitable dust
protection mask.
SPECIFIED CONDITIONS OF USE
K950 K, K950 S: The pneumatic hammer can be universally
used for hammer drilling and chiselling in stone and
concrete.
K900 K, K900 S: The hammer can be used for chiselling in
stone and concrete.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under “Technical Data” fulfills all the relevant
regulations and the directives 2011/65/EU (RoHs),
2006/42/EC, 2004/108/EC, 2005/88/EC (K900 K, K900 S)
and the following harmonized standards have been used:
EN 60745-1:2009 + A11:2010
EN 60745-2-6:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
Winnenden, 2012-12-13
Alexander Krug
Managing Director
Authorized to compile the technical file.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the
system voltage indicated on the rating plate. It is also
possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
times.
Important note! If the carbon brushes are worn, in addition
to exchanging the brushes the tool should be sent to
after-sales service. This will ensure long service life and top
performance.
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which have
not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Always disconnect the plug from the socket
before carrying out any work on the machine.
Accessory - Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national
law, electric tools that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Class II construction, tool in which protection
against electric shock does not rely on basic
insulation only, but in which additional safety
precautions, such as double insulation or
reinforced insulation, are provided.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.