page 8
For a complete listing of accessories refer to your
MILWAUKEE
Electric
Tool catalog. To obtain a catalog, contact your local distributor or a
service center listed on the back cover of this operators manual.
14" Abrasive Cut-Off Wheels
Cat. No. 49-93-6105
Cat. No. 49-93-6106
Cat. No. 49-93-6107Cat. No. 49-93-6108
12" Abrasive Cut-Off Wheels
Cat. No. 49-93-6101
Cat. No. 49-93-6102
Cat. No. 49-93-6103
Cat. No. 49-93-6104
12" Dry Cutting Diamond Blade
Cat. No. 49-93-8030
Wheel Guard
Shoe
Cat. No. 43-54-0775
Cat. No. 43-40-0315
Top Flange
Back Flange
Cat. No. 43-34-0780
Cat. No. 43-34-0785
Flange Nut 20mm
Flange Nut 1"
Cat. No. 44-40-0605
Cat. No. 44-40-0705
Hex Wrench
Open End Wrench
Cat. No. 49-96-0225
Cat. No. 49-96-4121
ACCESSORIES
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance
program. Before use, examine the general condition of your tool. Inspect
guards, switches, tool cord set and extension cord for damage. Check
for loose screws, misalignment, binding of moving parts, improper mount-
ing, broken parts and any other condition that may affect its safe opera-
tion. If abnormal noise or vibration occurs, turn the tool off immediately
and have the problem corrected before further use. Do not use a dam-
aged tool. Tag damaged tools DO NOT USE until repaired
(see Repairs).
Under normal conditions, relubrication is not necessary until the motor
brushes need to be replaced. After six months to one year, depending on
use, return your tool to the nearest
MILWAUKEE
service facility for the
following:
Lubrication
Brush inspection and replacement
Mechanical inspection and cleaning (gears, spindles, bearings,
housing, etc.)
Electrical inspection (switch, cord, armature, etc.)
Testing to assure proper mechanical and electrical operation
To reduce the risk of injury, always unplug your
tool before performing any maintenance.
Never disassemble the tool or try to do any
rewiring on the tool's electrical system. Contact
a
MILWAUKEE
service facility for ALL repairs.
MAINTENANCE
Cleaning
Clean dust and debris from vents. Keep the tool handles clean, dry and
free of oil or grease. Use only mild soap and a damp cloth to clean your
tool since certain cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include: gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia
and household detergents containing ammonia. Never use flammable or
combustible solvents around tools.
Repairs
If your tool is damaged, return the entire tool to the nearest service
center listed on the back cover of this operators manual.
WARNING!
To reduce the risk of injury, electric shock and
damage to the tool, never immerse your tool in
liquid or allow a liquid to flow inside the tool.
WARNING!
To reduce the risk of injury, always unplug the
tool before attaching or removing accessories.
Use only specifically recommended accesso-
ries. Others may be hazardous.
WARNING!
WARRANTY
Every
MILWAUKEE
product is warranted to be free from defects in
material and workmanship.
MILWAUKEE
will repair or replace any product
which examination proves to be defective in material or workmanship.
Limitations:
This warranty does not cover: 1) repairs made or at-
tempted by other than
MILWAUKEE
or
MILWAUKEE
Authorized Service
Station personnel; 2) normal wear and tear; 3) abuse; 4) misuse; 5)
improper maintenance; 6) continued use after partial failure; 7) tools that
have been modified; or product used with an improper accessory.
Battery Packs are warranted for one (1) year from the date of purchase.
Should a problem develop, return the complete product to any
MILWAUKEE
Factory Service Center or
MILWAUKEE
Authorized Ser-
vice Station, freight prepaid and insured. If inspection shows the prob-
lem is caused by a defect in material or workmanship, all repairs or a
replacement will be made at no charge and the product will be returned,
transportation prepaid. No other warranty, written or verbal, is authorized.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL
MILWAUKEE
BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
LOSS OF PROFITS.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED WHETHER FOR MERCHANTABILITY OR FITNESS FOR PARTICULAR
USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have
other rights that vary from state to state. In those states that do not
allow the exclusion of implied warranties or limitations of inciden-
tal or consequential damages, the above limitations or exclusions
may not apply to you.
