![background image](http://html1.mh-extra.com/html/milwaukee/5339-20/5339-20_repair-instructions_1799208021.webp)
21
PAGE
INSTRUCTIONS
REPAIR
58-92-5305 d1
Combined
drill/chisel
hammer:
Installing the
spindle
1 Install complete spindle assembly (1) into
gear box (2) as far as it will go, aligning ex-
ternal splines on spindle (1) with internal
splines of previously installed spindle bev-
el gear.
☞
Piston assembly must enter the rear/end
of spindle assembly!
☞
Spindle assembly (1) gets the necessary
lubrication when it is inserted into gear
box (2).
Chisel
hammer:
Installing the
spindle
1 To prepare, place o-ring (1), washer (2)
and locking ring (3) into gear box (5).
2 Install complete spindle assembly (4) into
gear box (5) and lead it through o-ring (1),
washer (2) and retaining ring (3).
☞
Spindle (4) gets the necessary lubrication
when it is inserted into gear box (5).
3 Insert spindle (4) as far as it will go.
☞
Piston (6) must enter the rear/end of spin-
dle!
4 Install retaining ring (3) completely into
spindle groove.
☞
The retaining ring (3) must audibly
engage into the spindle groove!
☞
Retaining ring (3) must be spread slightly
when installing spindle assembly.
1
2
3
2
1
4
5