background image

Page 3

OPERATION

When  to  charge  the  Power  Plus  battery  pack

Charge your battery pack before you use your tool for the first time and when

your tool no longer performs with the power and torque needed for the job.

Never completely discharge the battery pack.
New  battery  packs  reach  full  loading  capacity  after  4-5  chargings  and

dischargings.    Battery  packs  which  have  not  been  used  for  some  time

should be recharged before use.

Standard  charging  times

Standard charging time is approximately one hour.  Charging time varies

depending  on  the  battery  temperature,  charge  needed  and  the  type  of

battery pack being charged.  For example, if the battery pack does not

require a full charge, the charging time will be less than one hour.

Effects  of  temperature  on  charging

Battery packs are affected by temperature.  The charger will sense battery

temperature  and  will  charge  the  battery  at  the  most  rapid  rate  when  its

temperature is between 41°F (5°C) and 113°F (45°C).  When the battery

temperature is outside of this range, charging will occur at a slower rate

to prevent damage to battery.

Automatic  start

When a hot or cold battery pack is inserted into the charger, charging will

begin  automatically  once  the  battery  reaches  the  correct  charging

temperature.

Maintenance  charge

Batteries discharge at a rate of about 1% per day. The Maintenance Charge

feature  keeps the battery pack fully charged when the battery pack is stored

in a charger that is plugged in.  The Maintenance Charge automatically begins

after  the  battery  pack  is  fully  charged.  During  Maintenance  Charge,

the control light will be off.

Connect Charger to AC

Power Source

Light

Off

Insert Battery

Flashing

Light

Charge pending until

battery temperature is

below  140°F (60°C).

Battery temperature

41°F  - 113°F (5°C - 45°C)

Fast charging

Continuous

Light

Battery too cold

less than 14°F (-10°C)

Flashing

Light

Battery too hot

over 140°F (60°C)

Charge pending until

battery temperature is

above  14°F (-10°C).

Battery temperature

14°F - 41°F (-10°C - 5°C) or 113°F - 140°F (45°C - 60°C)

Charging at a slower rate

Charger Ready

Light

Off

Battery is charged/

Maintenance charging

Charging  the  Power  Plus  Battery  Pack

Charge  only 

MILWAUKEE

  9.6,  12,

14.4  and  18  Volt  Power  Plus  battery

packs  in  this  charger.  Other  types

of  batteries  may  explode  causing

personal  injury  and  damage.

WARNING!

All manuals and user guides at all-guides.com

Summary of Contents for 48-59-0245













Reviews: