2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
READ ALL SAFETY WARN-
INGS AND ALL INSTRUC-
TIONS.
Before use, read this instruction sheet, the
tool and dust extractor manuals, and all labels on the
bit, tool, and dust extractor. Failure to follow the
warnings and instructions may result in serious in-
jury. Save all warnings and instructions for future
reference.
• Use only with dust extractors with 'self-cleaning'
filters.
• Use the proper bit for the power tool. The bit
must properly fit the tool.
• Wear a dust mask or use an OSHA compliant
dust extraction solution
when working in dusty
situations. Dust particles can harm your lungs.
• This product is suitable for collection of silica
dust when used in accordance with these in-
structions. To reduce the risk of health hazards
from other vapors or dust, do not vacuum car-
cinogenic, toxic or hazardous materials
such as
asbestos, arsenic, barium, beryllium, lead, pesticides
or other health endangered materials.
• Ensure unit is properly attached to power tool
before use.
•
WARNING
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other re-
productive harm. Some examples of these chemi-
cals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
• The unit is compliant with Table 1 of OSHA
Standard 29CRF 1926.1153 assuming (1) it is
used in accordance with MILWAUKEE instruc-
tions; (2) it is attached to a dust collector that
has a filter with 99% or greater efficiency and
a filter-cleaning mechanism. Please reference
https://www.osha.gov for further details on
compliance methods.
• The unit is compliant as an objective data solu
-
tion of OSHA Standard 29CRF 1926.1153 when
it used without a dust collector, assuming it is
used in accordance with MILWAUKEE instruc-
tions. Please reference https://www.osha.gov
for further details on compliance methods.
READ AND SAVE ALL
INSTRUCTIONS
FOR FUTURE REFERENCE.
SYMBOLOGY
Read Operator's Manual
Always wear eye protection. Always
wear respiratory protection when not
using an OSHA compliant solution.
SPECIFICATIONS
Cat. No. ................................................ 48-03-3035
Max bit diameter ............................................... 3/4"
Max bit length ...................................................... 8"
Vacuum port inner diameter .......................... 1-1/4"
Adaptor outer diameter .................................. 1-3/4"
Adaptor inner diameter .................................. 1-1/2"
Adaptor ................................................. 49-90-1957
FUNCTIONAL DESCRIPTION
1
3
2
5
6. Strap mounting tab
7. Strap
8. Vacuum plug
9. Vacuum port
10. Base
4
6
7
8
9
10
1. Spring rims
2. Spring
3.
Plastic film
4. Compression lock
5. Dust shroud lock
ASSEMBLY
Removing and Installing Dust Caps
To
remove
the dust cap, pinch the unit at the com-
pression locks. Twist and pull unit away from the
base.
2
3
1
To
install
the dust cap, thread the cap into the dust
shroud lock. Pinch at the compression locks and
twist to lock in place.
Replacement packs can be ordered under
MILWAUKEE part number 48-03-3235.
