1
PAGE
4939 5228 01
Special Tools
Require
■
Forcing discs
4931 5990 18
■
TX 15
4931 5990 05
Important!
■
Before beginning the maintenance work, perform an initial check with a high voltage test according
to VDE (see chapter Electrical and Mechanical Test Instructions).
■
Before all repair work, pull the power plug from the socket!
Disassembly
Detaching
the handle
1
Unscrew the handle (1).
2
Machines with QUIK-LOK:
Pull off the
Quick-Lock connection cable (2).
Removing the
carbon brushes
1
Loosen the screws (1) on both service
covers (2) with TX 15.
2
Carefully lever off the service cover (2)
with aid of a screwdriver.
3
Loosen the plug contact of the carbon
brushes (3) on both sides and remove the
carbon brushes (3).
Detaching the
guard cap
1
Fold away the hoop on the Fixtec nut (1)
and unscrew the Fixtec nut (1).
☞
In case of stiffness, a pin-type face
spanner can be used.
2
Remove the grinding disc (2).
3
Remove the clamping flange (3).
4
Loosen three screws (4) and remove the
spring washer (5).
5
Remove the guard cap (6).
1
2
1
1
3
2
1
2
3
2
1
6
4
2
3
5
3
