background image

8

Cleaning

Clean  dust  and  debris  from  vents.  Keep  handles 

clean, dry and free of oil or grease. Use only mild 

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and 

other insulated parts. Some of these include gasoline, 

turpentine, lacquer thinner, paint thinner, chlorinated 

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use flammable or 

combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and charger 

to the nearest service center.

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com or contact a distributor.

SERVICE - UNITED STATES

1-800-SAWDUST

 

(1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit 

www.milwaukeetool.com

Contact Corporate After Sales Service Technical 

Support  with  technical,  service/repair,  or  warranty 

questions. 
Email: [email protected]
Become  a  Heavy  Duty  Club  Member  at 

www.milwaukeetool.com  to  receive  important 

notifications regarding your tool purchases. 

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd 

1.800.268.4015

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit www.milwaukeetool.ca

LIMITED WARRANTY                     

USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is warranted 

to the original purchaser only to be free from defects in material and 

workmanship. Subject to certain exceptions, MILWAUKEE will repair 

or replace any part on an electric power tool which, after examination, 

is determined by MILWAUKEE to be defective in material or workman-

ship for a period of five (5) years** after the date of purchase unless 

otherwise noted. Return of the power tool to a MILWAUKEE factory 

Service Center location or MILWAUKEE Authorized Service Station, 

freight prepaid and insured, is required. A copy of the proof of purchase 

should be included with the return product. This warranty does not 

apply to damage that MILWAUKEE determines to be from repairs 

made or attempted by anyone other than MILWAUKEE authorized 

personnel, misuse, alterations, abuse, normal wear and tear, lack of 

maintenance, or accidents.

Normal Wear: Many power tools need periodic parts replacement and 

service to achieve best performance. This warranty does not cover 

repair when normal use has exhausted the life of a part including, 

but not limited to, chucks, brushes, cords, saw shoes, blade clamps, 

o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and 

bumper cover washers.

*This warranty does not cover Air Nailers & Staplers; Airless Paint 

Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power 

Generators;  Hand  Tools;  Hoist  –  Electric,  Lever  &  Hand  Chain; 

M12™ Heated Gear; Reconditioned Product; and Test & Measure

-

ment Products. There are separate and distinct warranties available 

for these products.

**The warranty period for Job Site Radios, M12™ Power Port, M18™ 

Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts 

is one (1) year from the date of purchase. The warranty period for the 

Cables for the Drain Snake is two (2) years from the date of purchase. 

The warranty period for the LED in the LED Work Light and the LED 

Upgrade Bulb for the Work Light is the lifetime of the product subject 

to the limitations above. If during normal use the LED or LED Bulb 

fails, the part will be replaced free of charge. 

Warranty Registration is not necessary to obtain the applicable war

-

ranty on a MILWAUKEE power tool product. The manufacturing date 

of the product will be used to determine the warranty period if no proof 

of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT 

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON

-

TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. 

IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT 

PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE 

LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 

PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, 

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON

-

SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN 

ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS 

FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EX

-

CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ALL  OTHER  EXPRESS  WARRANTIES,  WRITTEN  OR  ORAL. 

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH 

DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR

-

RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE 

EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR

-

RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO 

YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, 

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 

STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only.

Please consult the ‘Service Center Search’ in the Parts & Service 

section  of  MILWAUKEE’s  website  www.milwaukeetool.com  or  call 

1.800.SAWDUST  (1.800.729.3878)  to  locate  your  nearest  service 

facility for warranty and non-warranty service on a MILWAUKEE 

electric power tool.  

LIMITED WARRANTY - MEXICO, 

CENTRAL AMERICA & CARIBBEAN

TECHTRONIC INDUSTRIES' warranty is for 5 years since the original 

purchase date. 

This warranty card covers any defect in material and workmanship 

on this Product.

To  make  this  warranty  valid,  present  this  warranty  card,  sealed/

stamped by the distributor or store where you purchased the product, 

to the Authorized Service Center (ASC). Or, if this card has not been 

sealed/stamped, present the original proof of purchase to the ASC.

Call toll-free1 01 (800) 030-7777 to find the nearest ASC, for service, 

parts, accessories or components.

Procedure to make this warranty valid

Take the product to the ASC, along with the warranty card sealed/

stamped by the distributor or store where you purchased the product, 

and any faulty piece or component will be replaced without cost for 

you. We will cover all freight costs relative with this warranty process.

Exceptions

This warranty is not valid in the following situations

a) When the product is used in a different manner from the end-user 

guide or instruction manual.

b) When the conditions of use are not normal.

c) When the product was modified or repaired by people not authorized 

by TECHTRONIC INDUSTRIES. 

Note:

 If cord set is damaged, it should be replaced by an Authorized 

Service Center to avoid electric risks.
SERVICE AND ATTENTION CENTER                                                                        

Call to 01 (800) 030-7777 
IMPORTED AND COMMERCIALIZED BY  

TECHTRONIC INDUSTRIES MEXICO, SA DE CV                          

Av President Masarik #29 piso 7, Col. Polanco V Sección  

CP 11560, Deleg. Miguel Hidalgo, CDMX

Model:
Date of Purchase:

Distributor or Store Stamp:

Summary of Contents for 2782-20

























Reviews: