Milnor 60 Series, Maintenance Manual

Page: 42 / 89

Chapter 3. Routine Maintenance
PELLERIN MILNOR CORPORATION
9. Grease ports for brake band bushings. Two places.
Figure 17: Grease ports for Shell Doors—Divided Cylinder Models (one or two outer doors)
Door Hinge—42044SP_ and
42044WP_
Door Hinge—60044SP_,
72044SP_ and 72044WP_. See
Item 2 for 60044WP2.
Door Latch
Plunger—most
models
Door Latch
Plunger—6004
4WP2
Legend
Door Stop Grease
port—42044SP_ and
42044WP_
Door Hand Wheel—42044SP_
and 42044WP_
.
1. Grease port, one place for
each door. Door must be
open for access.
2. Grease ports, two places
for each door. No
lubrication is necessary
on 60044WP2 (Rapid
Load) models.
3. Grease port, one place on
each door.
4. Apply a thin film of
grease to plunger surface,
one place on each door.
5. Apply oil to threads, one
place on each door.
38