Milnor 36026X8J, Installation And Service, Page: 40 / 126

Preventive Maintenance
PELLERIN MILNOR CORPORATION
Table 2: 36026X Final Drive Tension
Initial belt size (new belts
only)
Initial belt tension (new belts
and existing belts)
Final belt tension (existing
belts only)
L1 (inches) L2 (inches) L3 (inches)
116 116.3 116.6
116.2 116.5 116.8
116.4 116.7 117
116.6 116.9 117.2
116.8 117.2 117.4
117 117.4 117.6
117.2 117.6 117.8
117.4 117.8 118
117.6 118 118.2
117.8 118.2 118.4
118 118.4 118.6
118.2 118.6 118.8
118.4 118.8 119
118.6 119 119.2
118.8 119.2 119.4
119 119.4 119.6
119.2 119.6 119.8
119.4 119.8 120
119.6 120 120.2
119.8 120.2 120.4
120 120.4 120.6
120.2 120.6 120.8
120.4 120.8 121
120.6 121 121.2
120.8 121.2 121.4
121 121.4 121.6
121.2 121.6 121.8
121.4 121.8 122
121.6 122 122.2
5.
Service Notes
All V-belts are not alike. So-called “Super” or “High Capacity” belts frequently have
considerably higher capacities than “Standard” belts. Sometimes a particular manufacturer's V-
belts will be more suitable for a certain application and another manufacturer's V-belts may be
suitable for a different application. This may occur in spite of the fact that both manufacturer's V-
belts are reputedly “interchangeable.” Because of this, it is always best to purchase replacement
belts from the original manufacturer of the equipment. If you do not wish to do this, we suggest