manualshive.com logo in svg

Milltronics InterRanger IR-200, Instruction Manual

Share
Download
Milltronics InterRanger IR-200 Instruction Manual Download Page 21

PL-545

21

InterRanger IR-200

PROGRAM MODE

The PGM Mode is used to adjust and fine tune the InterRanger Monitor for use in different applications. To
access this mode, press the PGM key while in the normal RUN Mode. All measurement operations will cease
and the graphical display will show “help screens” for each parameter as it is selected.

For a more complete description of each parameter setting, see Parameters on page 23. The various
parameter settings are accessed by using the PREV PAGE and NEXT PAGE keys while in the PGM Mode.

The digital display shows the current setting for each program parameter. These values are adjusted by using
the up and down arrow keys. Hold down the appropriate arrow key to scroll through the available values
quickly.

Parameters may be adjusted in any order except for DISPLAY FORMAT. Whenever DISPLAY FORMAT is
changed all other parameters which specify distance must also be changed. These parameters return to their
defaults:

» 

Bottom Dead Zone

» 

Top Dead Zone

» 

Relay Number x Function

» 

Relay Number x “On” Setpoint

» 

Relay Number x “Off” Setpoint

Summary of Contents for InterRanger IR-200






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands