Millipore NovAseptic GMP ATEX, Installation And User Manual

Page: 15 / 45

Drive Unit (AX#/41-E#)
The drive unit delivers the rotating torque to the mixing head and is mounted on the
outside of the vessel.
Key
Number
Description
16 Magnetic outer drive head
17 Tank plate connection fl ange
18 Gearbox unit
19 Revolution counter
20 Motor
21 Serial number label
Required Tools
The following tools are required for installation of the NovAseptic GMP ATEX
Mixer.
The NovAseptic gauges 1 and 2 are included with the tank plate; the other tools
(shown below) are
not included with the mixer and are available from Millipore.
Component catalogue numbers and specifications can be found at www.millipore.
com.
Description Purpose
Multi tool
(GT#/25)
Installation tool for mixing head and male bearing
for use in small vessels.
Tightening tool (GT#/26) Installation tool for male bearing.
Heatsink tank plate (G94-#)
Attached to the tank plate during welding to pre-
vent deformation.
NovAseptic gauge 1 (G91-#)
For veri fi cation of geometry after welding.
NovAseptic gauge 2 (G92-#)
Optional Equipment
The following is available from Millipore. Catalogue numbers and specifications for
the component shown here can be found at www.millipore.com.
Description Purpose
Mixing head
attractor
(GT#/AW) Keeps the mixing head in
place when vessel is moved.
Replaces the drive unit during
transport.
21
16
17
18
19
20
x xxxxx
14 www.millipore.com