Millipore NovAseptic GMP ATEX, Installation And User Manual

Page: 12 / 45

Operator and Equipment Safety
All installers and operators of the equipment must read and understand this •
installation and user manual before using this equipment. Failure to follow
operating and installation instructions could result in operator injury or damage
to the equipment.
Any attempt to use the NovAseptic GMP ATEX Mixer equipment in a manner •
not specified by Millipore Corporation may result in damage to the equipment,
voiding of product warranty, and possible operator injury.
Any of the following can damage the mixer: • external load, reaction forces,
torque, corrosion, erosion, fatigue and the decomposition of unstable liquids.
Prior to operation, the equipment must be fully assembled according to the •
instructions in this manual.
Use appropriate personal protective equipment and eye protection when •
operating the equipment.
Protect drive unit against dust. •
The drive unit may be heavy. Use appropriate equipment to avoid injury. •
Do not install components close to rotating parts of the GMP ATEX Mixer. •
During mixing operations, mixer parts may become hot to the touch. •
Do not insert fingers into equipment; pinching may occur. •
Check the magnetic parts of the GMP ATEX Mixer regularly for foreign •
materials.
Do not run with an empty vessel. •
Check that all components in the mixer are of correct size. •
Handle the mixing head and male bearing with care; bearing material is hard •
and brittle.
Keep electrically controlled medical devices and magnetically stored media away •
from magnetic parts of the GMP ATEX mixer.
The mixing head must always be completely submerged. •
Follow Ex regulations applicable to the GMP ATEX mixer. •
System must be properly grounded. •
!
NovAseptic GMP ATEX Mixer Installation and User Guide 11