OM-245778 Page 23
7-3.
Setting A Start Sequence
To turn on a Start sequence, press the
START button. The START ON
INDICATOR will illuminate indicating Start
is active.
To turn off the Start sequence, press the
START button.
The START ON
INDICATOR will turn off indicating Start is
inactive.
To enter the START MENU press and hold
the START button until the START MENU
INDICATOR illuminates.
Rotate the LEFT ADJUST KNOB to select
different menu items shown in the LEFT
DISPLAY. Rotate the RIGHT ADJUST
KNOB to change menu item values shown
in the RIGHT DISPLAY.
To exit the START MENU, press and re-
lease the START button.
Items that can be adjusted in this menu are:
Start Wirefeed Speed (WFS) − Sets the
wirefeed speed used during the Start Time.
Range of this setting is from (70 to 780
IPM).
Start Voltage (VOLT) − Sets the voltage
during the Start Time. Range of this setting
is dependent on the power source voltage
range.
Start Time (TIME) − The amount of time the
wirefeed speed is active at the Start setting.
Range of this setting is from (0.1 to 0.5)
seconds.
Start Ramp Time (RAMP) − The amount of
time it takes to transition from the Start to
the weld wirefeed speed setting. Range of
this setting is from (0.1 to 5.0) seconds.
