background image

OM-1599 Page 9

SECTION 2 – DEFINITIONS

2-1.

Warning Label Definitions

1

1.1

1.2

1.3

3

3.1

3.2

3.3

4

4.1

+

2

2.1

2.2

+

+

5

6

+

2.3

S-178 936

Warning! Watch Out! There are
possible hazards as shown by the
symbols.

Drive rolls can injure fingers

Welding wire and drive parts are at
welding voltage during operation –
keep hands and metal objects
clear.

1

Electric shock can kill.

1.1 Wear dry insulating gloves.

Do not touch electrode with
bare hand. Do not wear wet or
damaged gloves.

1.2 Protect yourself from electric

shock by insulating yourself
from work and ground.

1.3 Disconnect input plug or

power before working on
machine.

2

Breathing welding fumes can
be hazardous to your health.

2.1 Keep your head out of the

fumes.

2.2 Use forced ventilation or local

exhaust to remove the fumes.

2.3 Use ventilating fan to remove

fumes.

3

Welding sparks can cause
explosion or fire.

3.1 Keep flammables away from

welding. Don’t weld near
flammables.

3.2 Welding sparks can cause

fires. Have a fire extinguisher
nearby and have a watch
person ready to use it.

3.3 Do not weld on drums or any

closed containers.

4

Arc rays can burn eyes and
injure skin.

4.1 Wear hat and safety glasses.

Use ear protection and button
shirt collar. Use welding
helmet with correct shade of
filter. Wear complete body
protection.

5

Become trained and read the
instructions before working on
the machine or welding.

6

Do not remove or paint over
(cover) the label.

Summary of Contents for SuitCase 8VS

































Reviews: