OM-262379 Page 11
SECTION 4 − SPECIFICATIONS
4-1.
Serial Number And Rating Label Location
The serial number and rating information for this product is located inside the door. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-2.
Unit Specifications
Type of
Input
Power
Welding
Power
Source
Type
Wire Feed
Speed
*
Wire
Diameter
Range
Input Welding
Circuit Rating
Max. Wire
Spool
Capacity
Overall
Dimensions
Weight
Open-Circuit/
Arc Voltage,
14 − 110
Volts DC
Constant
Voltage (CV)
Or Constant
Current (CC)
DC Power
Source Only
25 − 800 ipm
(0.64 − 20.3
mpm)
Depending On
Arc Voltage
Solid Wire:
.023 - .052 in.
(0.6 To 1.3 mm)
Flux Cored:
.030 - 5/64 in.
(0.8 To 2 mm)
230 Amperes At
100% Duty Cycle
330 Amperes At
60% Duty Cycle
14 lb (6.4 kg),
8 in. (203 mm)
Length: 18 in.
(457 mm)
Width: 7-1/4 in.
(184 mm)
Height: 12-3/4 in.
(324 mm)
28 lb
(13 kg)
*See Section 4-3 for detailed wire type, size, and rated speed range
4-3.
Wire Type, Size, and Feed Speed Capability Table
Motor Speed
Wire Type
Wire Size
Rated Speed Range
*
Standard
All
Solid Wire:
.023 - .052 in.
(0.6 To 1.3 mm)
Flux Cored:
.030 - 5/64 in.
(0.8 To 2 mm)
50 to 780 ipm
(1.3 -19.8 mpm)
*Rated speed range per IEC 60974-5
4-4.
Gun Recommendation Table
Process
Gun
GMAW − Hard or Cored Wires
Bernard Q-Gun
Tregaskiss Tough Gun
Roughneck C-Series
FCAW − Self-Shielding Wires
Bernard Dura-Flux Gun
Ironmate Series
4-5.
Environmental Specifications
A. IP Rating
IP Rating
IP23
This equipment is designed for outdoor use.
IP23 2017−02
B. Temperature Specifications
Operating Temperature Range
Storage Temperature Range
14 to 104
°
F (−10 to 40
°
C)
−4 to 131
°
F (−20 to 55
°
C)
Temp_2016- 07
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
ce-emc 3 2014-07
