Miller ST 44 Series Wire Feeder, Owner'S Manual

Page: 23 / 28

OM-216 655 Page 19
Table 7-1. Drive Roll And Wire Guide Kits (4 Drive Roll)
.
Base selection of drive rolls upon the following recommended usages:
1. V-Grooved rolls for hard wire.
2. U-Grooved rolls for soft and soft shelled cored wires.
3. U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4. V-Knurled rolls for hard shelled cored wires.
5. Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination with U-Grooved).
Wire Diameter
Kit No.
Drive Roll Wire Guide
Metric Fraction Decimal Part No. Type Inlet Intermediate
0.6 mm 0.023/0.025 in 0.023/0.025 in 087 132 087 130 V-Grooved 056 192 056 206
0.8 mm 0.030 in 0.030 in 046 780 053 695 V-Grooved 056 192 056 206
0.9 mm 0.035 in 0.035 in 046 781 053 700 V-Grooved 056 192 056 206
1.0/1.2 mm 0.035/0.045 in 0.035/0.045 in N/A 189 285 V-Grooved 156 193 056 207
1.0 mm 0.040 in 0.040 in 191 917 053 696 V-Grooved 056 192 056 206
1.2 mm 0.045 in 0.045 in 046 782 053 697 V-Grooved 056 193 056 207
1.6 mm 1/16 in 0.062 in 046 784 053 699 V-Grooved 056 195 056 209
0.9 mm 0.035 in 0.035 in 044 750 072 000 U-Grooved 056 192 056 206
1.2 mm 0.045 in 0.045 in 046 785 053 701 U-Grooved 056 193 056 207
1.3 mm 0.052 in 0.052 in 046 786 053 702 U-Grooved 056 193 056 207
1.6 mm 1/16 in 0.062 in 046 787 053 706 U-Grooved 056 195 056 209
2.0 mm 5/64 in 0.079 in 046 788 053 704 U-Grooved 056 195 056 209
0.9 mm 0.035 in 0.035 in 046 782 132 958 V-Knurled 056 192 056 206
1.2 mm 0.045 in 0.045 in 046 793 132 957 V-Knurled 056 193 056 207
1.3 mm 0.052 in 0.052 in 046 794 132 956 V-Knurled 056 193 056 207
1.6 mm 1/16 in 0.062 in 046 795 132 955 V-Knurled 056 195 056 209
1.8 mm 0.068-0.072 in 0.068-0.072 in 089 985 132 959 V-Knurled 056 195 056 209
2.0 mm 5/64 in 0.079 in 046 796 132 960 V-Knurled 056 195 056 209
1.2 mm 0.045 in 0.045 in 083 319 083 489 U-Cogged 056 193 056 207
1.3 mm 0.052 in 0.052 in 083 320 083 490 U-Cogged 056 193 056 207
1.6 mm 1/16 in 0.062 in 046 800 053 708 U-Cogged 056 195 056 209
2.0 mm 5/64 in 0.079 in 046 801 053 710 U-Cogged 056 195 056 209