Miller ST 44 Series Wire Feeder, Owner'S Manual

Page: 11 / 28

OM-216 655 Page 7
SECTION 3 − INSTALLATION
3-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on back . Use rating label to determine input power requirements and/or rated output.
For future reference, write serial number in space provided on back cover of this manual.
3-2. Specifications
Type of Input
Power
Welding Power
Source Type
Wire Feed
Speed Range
Wire
Diameter
Range
Welding
Circuit Rating
Overall
Dimensions
Weight
24 Volts AC Single
Phase
5 Amperes 50/60
Hz
Constant Voltage
(CV) DC with 14
pin and Contactor
Control
0 to 20 mpm
(0 to 788 ipm)
0.6 to 2.0 mm
(0.23 to 5/64 in)
Max Spool Weight:
15 kg (33.0 lb.)
100 Volts,
500 Amperes,
100%
Duty Cycle
Length: 650 mm
(25.5 in)
Width: 220 mm
(8.65 in)
Height: 420 mm
(16.5 in)
ST 44 Series &
ST Blu Fab
(22.0 kg (48 lbs)
ST 44 Ultra-Lite
15.0 kg (33 lbs)
3-3. Gun Recommendation Table
Process Gun
GMAW − Hard or Cored Wires Roughneck C-Series Guns: 300,
400, 500, And 600 Amp.
FCAW − Self-Shielding Wires FC-1260 Or FC-1150
1 CV Welding Power Source with
14 pin Amphenol Receptacle
2 Interconnecting Control Cord
(Required)
3 Weld Cable (Required)
4 Work
3-4. Equipment Connection Diagrams
4
3
2
1