Miller MigMatic 300, Owner'S Manual

Page: 39 / 72

OM-251958 Page 33
5-12. Welding Power Source Setup Menu (DX Models Only)
1 Wire Feed Speed (WFS)/Trim
(Arc Length) And Line Input
Adjustment Control R1
2 Synergic Mode Indicator
3 Voltage LED
4 Digital Display Meter
5 Amperage LED
6 Wire Feed Speed LED
7 Setup Button
8 Manual Mode Indicator
9 Voltage Control
10 Trigger Mode Button
Use setup button to select desired
parameter: voltage, amperage, or
preset wire feed speed and light up
the corresponding LED (V, A, or %).
Rotate Wire Feed Speed (WFS/
Trim (Arc Length) And line Input Ad-
justment Control to change wire
feed speed or amperage, depend-
ing upon which parameter is active.
Rotate voltage control to change
voltage when voltage LED is lit.
The value of the selected paramet-
er is displayed on display meter.
.
The default for preset wire feed
speed is meters per minute. To
change to inches per minute,
press and hold setup and trig-
ger function buttons for approx-
imately 5 seconds.
Selecting Manual Or Synergic
Mode
Press and hold setup button for ap-
proximately 3 seconds to switch
between manual mode (see Sec-
tion 5-16) and synergic mode (see
Section 5-17), and light up the cor-
responding mode indicator LED.
Ref. 956142845_4_14_A / 356029236_C
1
2
3 4
5 6
7
8
10
9