OM-235 241 Page 15
5-2.
Initial Setup
956.142.656
1
Process Control Adjust
2
Setup Control
3
Decrease Control
4
Increase Control
5
Ammeter And Parameter
Display
6
Power Switch
To enter Initial Setup, turn power off.
Press and hold Increase and
Decrease controls and turn power
on. Continue to hold Increase and
Decrease controls until software
version clears display, and display
begins to flash, release Increase
and Decrease controls.
Upon power up TIG HF and Pulse
LEDs turn on, and the factory de-
fault of 400 flashes on the display.
Press the Setup control to scroll
through the following: power source
current range, current reading dis-
play, and TIG starting current.
Setting Power Source Current
Range:
Setting Maximum Amperage −
While display is flashing, press the
Increase and decrease controls un-
til amperage shown on display
matches the maximum value of the
welding power source (see welding
power source Owner’s Manual).
Maximum amperage range is 200 to
600 amps, with 400 amps being the
default.
Press Setup control to confirm set-
ting and continue Initial Setup.
Setting Minimum Amperage − While
display is flashing, press the In-
crease and decrease controls until
amperage shown on display
matches the minimum value of the
welding power source (see welding
power source Owner’s Manual).
Minimum amperage range is 5 to
200 amps, with 20 amps being the
default.
Press Setup control to confirm set-
ting and continue Initial Setup.
Setting Current Display Reading:
While display is flashing, press the
Increase and Decrease controls to
select CURR or NOCU (CURR is
the default). CURR is actual current
output of the power source. NOCU
is the percentage of the current out-
put of the power source.
Press Setup control to confirm set-
ting and continue Initial Setup.
Setting TIG Starting Current:
While display is flashing, press the
Increase and Decrease controls to
set the TIG start current. The start
current range is 10 to 200 amps, 20
amps is the default.
Press Setup control to confirm set-
ting
Turn power off to exit Initial Setup.
6
5
1
2
3
4
