OM-275857 Page 14
�
Complete Parts List is available at www.MillerWelds.com
SECTION 4 – SPECIFICATIONS
4-1.
Serial Number And Rating Label Location
The serial number and rating information for the power source is located on the front of the machine. Use the rating labels to determine input
power requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2.
Software Licensing Agreement
The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www.millerwelds.com/eula
and are incorporated by reference herein.
4-3.
Information About Default Weld Parameters And Settings
NOTICE –
Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical
welding parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are
for reference purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriate-
ness of all parameters and settings should be evaluated and modified by the end user as necessary based upon application-specific require-
ments. The end user is solely responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld
parameters and settings, and ultimate quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warran-
ties including any implied warranty of fitness for a particular purpose.
4-4.
Specifications
�
Do not use information in unit specifications tables to determine electrical service requirements. See Sections 5-14 and 5-15 for information
on connecting input power.
�
This equipment will deliver rated output at an ambient air temperature up to 104° F ( 40° C).
A. Dynasty 400 Models
Welding Amperage Range
Max. Open Circuit Voltage (U
0
)
Low Open-Circuit Voltage (U
0
)
Rated Peak Striking Voltage
(U
p
)
3–400 A
Welding range for Stick process
is 5–400 amperes. For TIG, the
amperage range is tungsten di-
ameter dependent. See Section
75 V
Normal open-circuit voltage is
present while in Stick with normal
open-circuit voltage selected.
8–15 V
Low open-circuit voltage is
present while in TIG Lift-Arc, or
while in Stick with low open-cir-
cuit voltage selected.
14 kV
Arc starting device is designed
for manual guided operations.
Input
Power
Rated Welding Output
Amperes Input at Rated Load Output 50/60 Hz
208 V
230 V
380 V
400 V
460 V
575 V
kVA
kW
Three
Phase
250 A @ 30 Volts,
100% Duty Cycle
28
25
15
14
13
10
10.3
9.8
300 A @ 32 Volts,
60% Duty Cycle
36
33
19
19
16
13
13.1
12.5
400 A @ 36 Volts,
20% Duty Cycle
55
49
29
28
24
19
19.4
18.6
Single
Phase
200 A @ 28 Volts,
100% Duty Cycle
40
36
—
20
17
13
8.2
7.5
250 A @ 30 Volts,
60% Duty Cycle
52
47
—
26
22
17
10.9
9.9
300 A @ 32 Volts,
20% Duty Cycle
67
60
—
33
28
22
13.9
12.7
�
This unit is equipped with Auto-Line. Auto-Line is an internal inverter power source circuit that automatically links the power source to
any primary input voltage from 190 to 625 volts, single-or-three-phase, 50 or 60 hertz. It also adjusts for voltage spikes within the entire
range.
Summary of Contents for Dynasty 400
