Miller 14-Pin Insight Core CE, Owner'S Manual

Page: 26 / 52

266 098 Page 20
4-8. Running Configuration App For Installation Of Firmware And Connection Criteria
.
The application provides the ability to update the firmware on your Insight Core module, set the device for a wired Ethernet connection, or set it
for a wireless Wifi connection.
1. To run the application, double-click on the shortcut that was automatically installed on your desktop, or on the program (.EXE) file inside the
application listed in All Programs (see Figure 4-11).
Figure 4-11. Setup Application Shortcut
2. The application will automatically check to see if a newer version of the application exists. If so, you will be prompted to replace your version with
the most recent version (see Figure 4-12).
Figure 4-12. Checking For Newer Version Of Application
If you are running the application on a computer that is not connected to the internet, this automatic version check will fail, enabling you to continue using
the current version you have installed by clicking OK, or cancelling in order to re-establish an internet connection (see Figure Figure 4-13).
Figure 4-13. Internet Connection Message Screen