Miller Electric Millermatic 350P, Owner'S Manual

Page: 13 / 68

OM-254915 Page 9
SECTION 3 − DEFINITIONS
3-1. Additional Safety Symbols And Definitions
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 − 05
Drive rolls can injure fingers. Welding wire and drive parts are at welding voltage during operation − keep hands
and metal objects away.
Safe95 2012 − 05
Beware of electric shock from wiring.
Safe94 2012 − 08
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012 − 05
Safe96 2012 − 06
Move relinking board as shown on inside label to match input voltage
at job site. Double-check all connections, relinking board position, and
input voltage before applying power.
Safe97 2012 − 05
For single phase operation, insulate and isolate red conductor.
Include extra length in grounding conductor and connect grounding
conductor first. Connect black, white, and red wires (L1, L2, L3) to
line terminals.
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012 − 05
>5min
V
V
V
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 5 minutes after
power is turned off before working on unit, OR check input capacitor
voltage, and be sure it is near 0 before touching any parts.
Safe43 2017 − 04