Miller Electric Legend AEAD-200LE, Technical Manual

Page: 35 / 68

TM-428 Page 31 Miller Legend
B. Adjusting Brush Position
Stop engine.
After installing brushes, adjust
brush position as follows:
1 Brush Holder
2 Brass Sleeve
3 Brush
4 Slip Ring
Loosen brush holder bracket
mounting hardware. Move bracket
until brass sleeves are positioned
as shown. Tighten hardware.
Reinstall side panels and cover.
If operation is still not okay, have a
qualified machine shop turn and
polish slip rings.
Ref. ST-800 698-A / Ref. ST-800 677-B
Tools Needed:
3/8, 1/2 in
2
4
1
Center brushes on slip
rings.
Correct Brush Position
Top View
Side View
Incorrect Brush Position
1 2 3 4
3/32 in
(2.4 mm)
Correct
Brush Position
Incorrect
Brush Position
3