Miller Electric Legend AEAD-200LE, Technical Manual

Page: 7 / 68

TM-428 Page 3 Miller Legend
SECTION 2 – INSTALLATION
2-1. Installing Welding Generator
install1 10/95 – Ref. ST-800 652 / Ref. ST-800 477-A / ST-158 936-A / S-0854
1
2
Electrically bond generator frame to
vehicle frame by metal-to-metal
contact.
GND/PE
3
4
1 Generator Base
2 Metal Vehicle Frame
3 Equipment Grounding
Terminal
4 Grounding Cable
Use #10 AWG or larger insulated
copper wire.
Y
If unit does not have GFCI
receptacles, use GFCI-pro-
tected extension cord.
2
OR
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
OR
Movement Airflow Location
Grounding
OR
Y
Do Not Lift Unit From End
2-2. Dimensions, Weights, And Operating Angles
A
Dimensions
A
Height 31-5/8 in (803 mm)
Y
Do not exceed operating angles while
running or engine damage will occur.
D t t it h it ld
Width 18 in (457 mm)
Y
Do not move or operate unit where it could
tip.
Depth 45 in (1143 mm)
B
A 16-1/2 in (419 mm)
B 32-3/4 in (832 mm)
25
°
C 13/16 in (21 mm) Dia.
25
°
25
°
25
°
Weight
25
°
C
Net 559 lb (254 kg)
Engine End
Ship 600 lb (272 kg)