Sensing
Edge
Installation
To install remove edge from shipping container and lay
out flat and straight. Close air valve. Position edge in de-
sired location and attach with screws through mount-
ing flange at ends and center. Continue to attach edge
by securing mounting flange with screws placed 24”
apart. Do not place screws below seal line. For detailed
installation & wiring instructions, contact MillerEdge, Inc.
Care of the MT22. . .
Minimal care is required for MT style SensingEdges
since they are manufactured with only the most
durable materials and the highest quality control stan-
dards. However, SensingEdges should be examined
regularly for cuts or punctures which could damage
internal components. Also check wiring to be sure
connections are secure. When properly maintained,
the MT22 offers years of trouble-free operation.
Warranty
We will replace within one year of shipment from our
factory, any SensingEdge subject to normal use
which is found to have defective materials or work-
manship, as determined solely by our factory repre-
sentative. Replacements will be shipped to you
freight collect. This warranty is void where evidence
of misuse or abuse is present.
Model # MT22
P.O. Box 159 • West Grove, PA 19390 • (610)869-4422 • Fax: (610)869-4423 • 800-220-3343
6809 South Harl Avenue, Suite A, Tempe, AZ 85283 • (480)755-3565 • Fax (480)755-3558 • 800-887-3343
www.milleredge.com
Mechanical Diagrams:
2
”
1
1/2”
2
”
MT22_Spec_20140819
U.S. Patent #5,962,825 CAN. Patent #2,008,021
For more information, please visit www.devancocanada.com
or call toll free at 855-931-3334
