background image

 

3

5.  ADDITIONAL POOL SAFETY RELATED PUBLICATIONS ARE AVAILABLE FROM THE FOLLOWING: 
 

ASSOCIATION OF POOL & SPA PROFESSIONALS 

 

 

CONSUMER PRODUCT SAFETY COMMISSION 

 

2111 EISENHOWER AVE      WASHINGTON,

 DC  20207 

 

ALEXANDRIA, VA  22314-4695 

IMPORTANT INSTALLATION ITEMS 

1.  LEVELNESS; POOL MUST BE LEVEL WITHIN 3/4”. UNLEVEL POOLS PLACE EXTREME FORCES ON THE POOL WHICH MAY DEFORM. 
2.  WALL CLOSURE; THE POOL WALL MUST BE FASTENED TOGETHER PROPERLY WITH BOTH BARS AND FASTENERS IN ALL HOLES. 
 

OMITTED BARS OR FASTENERS CAN CAUSE THE WALL TO RUPTURE, DESTROYING THE POOL AND INJURING PEOPLE. 

3.  SAND COVE; THIS SUPPORTS THE LINER AND MUST BE PACKED SOLID. IF IT COMPRESSES, SHIFTS OR ERODES THE LINER MAY 
 

RUPTURE, RELEASING ALL THE WATER AND DESTROYING THE POOL AND INJURING PEOPLE. 

4.  THESE POOLS ARE NOT DESIGNED TO BE BURIED. THE GROUND FORCES CAN COLLAPSE THE POOL INWARD. FOR SEMI IN-

GROUND INSTALLATIONS, CONTACT YOUR DEALER FOR DOCUMENT T3964. 

5.  DO NOT LOCATE YOUR POOL NEAR STRUCTURES SUCH AS A HOUSE, GARAGE, ETC. AS PEOPLE COULD DIVE OR JUMP INTO 
 

THE POOL RESULTING IN DEATH OR PERMANENT INJURY. 

6.    ALTHOUGH THERE ARE RELATIVELY FEW PARTS IN YOUR POOL, NONE MAY BE OMITTED IN ASSEMBLY.  EACH PART SUPPLIED                      
 

IS AN IMPORTANT PART AND IF OMITTED, MAY CAUSE POOL FAILURE.  CHECK ALL  PARTS AGAINST THE PARTS LIST. 

WARNING:

    Do not exceed the following torque values for the noted fasteners: 

 

 

1/4” - 20 S. S. Fasteners 

  75 (in. lbs.) 

 

 

3/8” - 16 S. S. Fasteners 

236 (in. lbs.) 

 

 

3/8” - 16 Aluminum Fasteners 

143 (in. lbs.) 

TOOLS AND MATERIALS 

PHILLIPS SCREWDRIVER #2 

HAND TROWEL 

EXTENSION CORD 

HAMMER  

RAKE 

 

SLOTTED SCREWDRIVER #2 

GARDEN HOSE & NOZZLE   

STRING LINE 

 

PLIERS   

 

SOCKET WRENCH & SOCKETS 

50’ TAPE MEASURE  

 HAND 

TAMPER 

 TO

RQUE WRENCH 

 

TRANSIT OR FARM LEVEL   

ELECTRIC DRILL & BITS  

 

GARDEN SHOVEL  

WRENCHES  

 

 

 

1 LONG STRAIGHT 2 X 4   14’ LONG 

1 ROLL DUCT OR FABRIC TAPE 

WHEELBARROW 

25 WOOD STAKES 

1 CAN WHITE SPRAY PAINT 

PLASTIC GROUND COVER 

 

SAND AND BLOCK CHART                    SAND            

 2” x 8” x 16”   

4” x 8” x 16” 

 P

OOL SIZE      

       TONS           YARDS        PATIO BLOCKS          CAP BLOCKS 

 

12'x18'      

2      

1 1/4           

12                

 

12’x21’ 

2 1/2 

1 3/4 

12 

                    12’x24’ 

  8 

 

15'x24'      

3 1/2      

2 1/4          

12                

 

15'x30'      

4          

2 3/4          

12              

  8 

 

18'x33'     

5 1/4      

3 1/2          

14              

  8 

SELECTING THE POOL SITE 

1. Check your local building codes and acquire proper building permits.  For poor soil conditions consult a 

 profe ssional engineer. 

2. The pool site must be absolutely level and solid.  The area must be free from stones and roots.  

3. To protect the pool from chemicals and foreign matter in the soil, use a ground cover under the sand base.  

    Do not install your pool on asphalt, tarpaper, grass, wood, gravel, clay, concrete, or treated soils. 

4. Position your pool away from trees, overhead wires, structures such as a house or garage or septic fields. 

GROUND PREPARATION

 

Your pool must be installed on a solid level surface, perform the soil test as illustrated below. Position stakes as shown 

on figure 1 a nd use a farm level or transit  to level the are a shown. Remove all gra ss, roots and ston es. Start at th e 

lowest spot, remove all high spots, do not fill in low spots.  The area must be absolutely level.  Lines 1 through 6 of the 

following table refers to Figure 1.  

 

 

NOTE:

 Sand must be 

masons or bar  sand and 

be free of foreign objects

 

Soil Test 

Dig a hole in the pool area one foot square and one foot deep and fill with water.  If at the end of one hour the water has not 
completely soaked in, the following steps must be taken: 

1.

 

Round Ends:  3 patio blocks must be placed under each bottom clip as shown in figure 8. 

2.

 

Oval Midsections:  A concrete footing must be placed under the end of each Delta upright along both sides and down 
the length of the bottom rail.  Consult a local professional engineer to determine the size and type of concrete footing to 
be installed.  The design load per upright is 4,000 lbs. 

 OVAL POOLS 

LINE “1” 

LINE “2” 

LINE “3”  LINE “4”   LINE “5”  LINE “6” 

12’ X 18’ 

7’ - 3” 

  6’ - 3” 

  7’ - 0” 

6’-0” 

17’ - 7” 

2’-8” 

12’ X 21’ 

7’ - 3” 

  6’ - 3” 

10’ - 0” 

9’-0” 

17’ - 7” 

2’-8” 

12’ X 24’ 

7’ – 6” 

  6”- 0” 

13”- 0”       12’-0” 

17’ - 7” 

2’-8” 

15’ X 24’ 

8’ - 6” 

  7’ - 6” 

10’ - 0” 

9’-0” 

20’ - 1” 

2’-8” 

15’ X 30’ 

8’ - 6” 

  7’ - 6” 

16’ - 0” 

15’-0” 

20’ - 1” 

2’-8” 

18’ X 33’ 

10’ - 0” 

9’ - 0” 

16’ - 0” 

15’-0” 

23’ - 1” 

2’-8” 

Summary of Contents for T3669-80A














Reviews: