background image

5082019

29

IMPORTANT WARRANTY INFORMATION

Millennium Outdoors, LLC warrants this Millennium product against defect(s) in material and workmanship, under proper use and stor-

age for the period of one (1) year from the date of purchase. Proof of purchase, plus, the return of your warranty application card to our 

home office, is required for any warranty claim. In the event this product is found to be defective within the warranty period, Millennium 

Outdoors, LLC only obligation and your exclusive remedy shall be replacement or repair of any defective parts at our discretion. To obtain 

warranty service, please contact Millennium Outdoors, LLC customer service at (601) 932-5832. Exclusions to this warranty include seat, 

paint, plastics, webbing and/or defects caused by operator misuse and/or abuse. Limitation to liability include the forgoing warranty is 

made in lieu of all other warranties, express or implied and Millennium Outdoors, LLC disclaims any implied warranty of merchantability 

and fitness. Millennium Outdoors, LLC shall not be liable for any damages direct, consequential or incidental arising out of the use or 

inability of this product.

Your new Millennium treestand is factory finished with a state-of- the-art powder coating that guarantees years of trouble-free ser-

vice. It is recommended that you store your  treestand out of direct sunlight and out of any other harsh environmental condition(s) 

that may adversely affect its performance. 

CARE AND MAINTENANCE/WARRANTY

WARRANTY APPLICATION CARD

I have read and understand the safety, assembly and operating instructions provided with my 
Millennium treestand. I fully understand the importance of using the full-body fall arrest safety 
harness which meets or exceeds industry standards recognized by the TMA, and realize that if I 
choose not to use the full-body fall arrest safety harness I am putting myself at an increased risk 
of injury should an accident occur while I am utilizing this Millennium product(s). I have read the 
warranty information and know that I can call Millennium at (601) 932-5832 with any questions 
or concerns that I may have about this or any other Millennium product(s). Mail to: Millennium 
Outdoors, LLC, 201 Fairmont Plaza, Pearl, MS 39208, (601) 932-5832.

NAME

ADDRESS

CITY/STATE/ZIP

PURCHASE DATE

PRODUCT

PURCHASED WHERE

Mail this warranty card to:

Millennium Outdoors, LLC

 201 Fairmont Plaza

Pearl, Mississippi

39208

Summary of Contents for OL'MAN OL-22-00































Reviews: