5082019
17
Figure 22
Install Arm Rests
STEP 7: Attach the arm rests to the platform using two (2) 5/16 x 4” bolts, two (2) bushings, four (4) washers and two (2) nuts. NOTE:
Place the bushings between the arm rest and the platform. Place one (1) washer under the head of the bolt and one (1) washer under
the nut on each bolt. Attach the armrests to the uprights using four (4) 5/16” x 2-3/4” bolts, twelve (12) washers and four (4) nuts as
shown in Figure 22. Place one (1) washer between the armrest and upright and one (1) washer under the head of bolt and one (1)
washer under the nut as shown in Figure 7.
Figure 23
Install Foot Rest
STEP 8: To install the foot rest, connect the footrest to the uprights using two (2) ¼” x 2-1/2” bolts, eight (8) washers and two (2) nuts.
Place one (1) washer under head of each bolt, two (2) washers between footrest and upright and one (1) washer under nut as shown
in Figure 23.
WARNING! DO NOT place more than fifteen (15) pounds (7 kg) of weight on the footrest, shooting rail or seat back. DO NOT attempt to use
any of these as a handhold or to pull yourself up into or lower yourself while exiting the treestand. Doing so will result in an unsafe condi
-
tion. Failure to follow these instructions may result in serious injury or death!
WARNING! DO NOT place more than fifteen (15) pounds (7 kg) of weight on the footrest, shooting rail or seat back. DO NOT attempt to use
any of these as a handhold or to pull yourself up into or lower yourself while exiting the treestand. Doing so will result in an unsafe condi
-
tion. Failure to follow these instructions may result in serious injury or death!
