5082019
21
STEP 15: With the seat folded flat on a table or a flat surface you can tighten all the outer frame bolts, but only tighten all of them half
way then go back and tighten them all until they are tight, failure to tighten in this manner will warp the seat and it will not function
properly.
Figure 31
Attach Seat Assembly to Stand Frame
STEP 16: Attach the seat assembly to the stand frame using four (4) ¼” x 1-3/4” bolts, four (4) washers and four (4) nuts. Place wash-
ers under the nuts only. \DO NOT place washers under the head of the bolts as shown Figure 31. Do not tighten bolts yet.
Figure 32
Assemble Ladder Adapter
STEP 17: Assemble the ladder adapter using two (2) ¼” x 2-3/4” bolts, four (4) washers and two (2) nuts as seen in Figure 32. Do not
tighten nuts yet.
WARNING! DO NOT place more than fifteen (15) pounds (7 kg) of weight on the footrest, shooting rail or seat back. DO NOT attempt to use
any of these as a handhold or to pull yourself up into or lower yourself while exiting the treestand. Doing so will result in an unsafe condi
-
tion. Failure to follow these instructions may result in serious injury or death!
