61029_321_ind_
00
of
01/2014
http://www.tubesca-comabi.com/
PAGE
1/2
PROFORT X’TEND operating instructions, ref: 02272/750
Product compliant with standard NF P 93-353 of December 2009
3 --> 4 --> 5
0
.
7--> 0
.
93 --> 1
.
16 1
.
28-->1
.
47-->1
.
65
0
.
78-->1
.
57-->1
.
57
20
.
5
1
.
36x0
.
49x0
.
76
150Kg
Pf
Ht
1
2
3
4
Lg
L x H x
W
i
n m
H
L1 (m)
L2 (m)
Kg
Kg
Product folded
1.
Product description
This individual mobile platform for individual use is designed for finishing and equipment fitting work The platform can be used by just one
operator working on the ground.
It is fitted with two non-swivel rollers used for positioning it.
It is equipped with two independent adjustable stabilizers for use in 4 and 5 step versions. The stabilizers hold the unit perfectly securely
under the normal operating conditions recommended by the standard.
Put the guardrail in place
by pivoting it
LOCK THE CAM
The stabilizer is put in place by unlocking the cam. It is in place once it
makes contact with the floor. The cam must then be locked in position
before the unit can be used.
2.
Use
2.1.
Assembly
Undo the velcro fastener and unfold the platform by lowering it
THE PIN MUST
BE ‘OUT’
Take hold of the two guardrail tubes
THE LOCK MUST
BE CLOSED
Adjust the size of
the unit step by
step.
Unlock the hook with your right hand. Take hold of the platform with your left hand and raise so that the hook is lowered
below the bottom step.
