4K HDBaseT 4x4 Matrix Switcher
24
4.4.1 Control Modes
MPM-44-IR-N can be controlled by PC without Ethernet access or PC(s) within a LAN.
Controlled by PC
Connect a computer to the TCP/IP port of the MPM-44-IR-N, and set its network
segment to the same as the MPM-44-IR-N
’s (Default: 192.168.0.178).
Controlled by PC(s) in LAN
Connect MPM-44-IR-N, a router and several PCs to setup a LAN (as shown in the
following figure). Set the network segment of MPM-44-IR-N to the same as the router
’s,
then PCs within the LAN are able to control MPM-44-IR-N.
Router
Internet
PC
TCP IP Port
/
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of MPM-44-IR-N to Ethernet port of PC with twisted
Same network
segment as the
switcher
