4K HDBaseT 4x4 Matrix Switcher
7
3.4 Connection Procedure
1)
Connect HDMI sources (e.g. DVD) to HDMI inputs of the MPM-44-IR-N with HDMI
cables.
2)
Connect auxiliary audio sources to the AUDIO IN ports with audio cables.
3)
Connect HDBaseT receivers (e.g. MPTP-T70R) to the HDBaseT Output ports with
twisted pair.
4)
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the MPM-44-IR-N or the
receivers with HDMI cables
5)
Connect speakers/earphones to AUDIO output ports
6)
Connect the RS232 port of control device (e.g. a PC) to the RS232 port of either
MPM-44-IR-N or far-end receivers. RS232 signal can be transmitted bi-directionally
between MPM-44-IR-N and far-end receivers.
7)
MPM-44-IR-N can collect IR signal sent by the included IR remote via its built-in IR
sensor or through external IR receiver connected to the IR IN/ IR EYE/ IR ALL IN
port. The IR signal can be transmitted bi-directionally between MPM-44-IR-N and
far-end receivers.
8)
Connect a DC 24V power adapter and the MPM-44-IR-N.
Note:
1. Connect HDBT ports of MPM-44-IR-N and far-end receiver with straight-through
cable.
2. IR receivers connected to IR IN& IR ALL IN should be with carrier. If not, send
command %0900. or %0901.to activate native carrier mode or force carrier mode in
the IR matrix launched between MPM-44-IR-N and far-end receivers.
3.5 Connection with HDBT Receiver
MPM-44-IR-N boasts 4 HDBaseT output ports which support PoC solution. Connect the
HDBT output ports of MPM-44-IR-N to HDBaseT Receivers supporting PoC (like
MPTP-T70R) via twisted pair. Plug a power supply to the power port of MPM-44-IR-N,
the HDBaseT Receivers will be energized synchronously with PoC solution.
Po
C
DC 24V
MPTP-T70R(PoC)
