FCAV1U
Installation Instructions
8
ADJUSTMENTS
Moving Mount to Wall (Optional)
1.
Close the FCAV1U brackets and tighten the retainer latch
(turn
counterclockwise
) to hold the brackets in the
retracted position. (See Figure 5)
IMPORTANT ! :
Do NOT over-tighten the retainer latch.
Figure 5
Moving Mount to Service Position
2.
Loosen the retainer latch by turning screw
clockwise
. (See
Figure 5)
3.
Pull mount out from wall.
4.
Return mount towards wall after service is complete.
Adjusting Mount Against Wall
IMPORTANT ! :
Carefully adjust the mount plumb evenly
on both sides to avoid placing too much stress on the
screen.
5.
Adjust plumb of mount by turning the adjustment nut on the
FCAV1U. (See Figure 6)
Figure 6
1
1
Tighten retainer
latch by turning
counterclockwise
Loosen retainer
latch by turning
clockwise
2
3
4
5
