Compact Scaler Switcher (with PoC)
4
2.2 Rear Panel
①
AUDIO INPUT
Including 3 HDMI audio & 2 VGA audio inputs
User can choose any one audio (embedded HDMI audio or external input audio) for
HDMI audio input by sending RS232 commands.
②
AUDIO OUTPUT
Audio output port, the audio comes from the input audio corresponding to the
selected video source and mixed with MIC audio.
③
IR OUT
5 in total, connect with IR emitters to control local source devices or MP-SC-5T from
remote, switched along with corresponding video source.
④
IR IN
Connects with IR receiver (with carrier wave only), to receive IR signal send by the
IR remote or remote controller of other input/output device.
⑤
FIRMWARE
USB port, connects with USB flash disk or other storage which is with update file
inside, to update the system firmware.
⑥
RS232
Serial control port, 3-pin captive screw connector, connect with a control device
(such as a computer) to control MP-SC-5T or other devices connected with HDMI
Twisted Pair PoC Receiver.
⑦
DC 12V
Power port, connect with DC 12V power adapter.
⑧
MIC
a)
MIC port
Connect with microphone
b)
Dial switch
Including 3 levels: 48V phantom power mode (connect with condenser
microphone), MIC mode (connect with dynamic microphone) and LINE mode
(connect with wireless microphone or line audio).
MIC
OUTPUT
VIDEO INPUT
IR OUT
VGA 2
RS232
FIRMWARE
HDMI 1
AUDIO INPUT
VGA 2
HDMI 1
HDMI 2
HDMI 3
HDMI 2
OUTPUT
R
L
MIC
IR IN
HDMI 3
VGA 1
VGA 1
HDBT/PoC
1
2
3
4
5
48V
LINE
Tx
Rx
DC 12V
AUDIO
R
L
R
L
R
L
R
L
R
L
1
2
3
9
a
b
c
d
4
5
6
7
8
10
