Compact Scaler Switcher (with PoC)
29
STANDBY on. Only when CEC is on, will it be able to set auto-standby status.
OSD Duration
: Includes 5 s, 10 s, 15 s and Off.
“s” is for Second.
VERSION
: Displays software version
4.6 Instructions of VGA Converting Cable
As VGA source supports YPbPr and C-video source, MP-SC-5T provides with 2 VGA
converting cables to compliant with these signals.
When need to select these signals as input source, please switch to channel INPUT 4
(or INPUT 5), and then set the signal type in OSD. And then switch to other input
channel and connect INPUT 4 (or INPUT 5) with corresponding source device. At last,
please switch to INPUT4 (or INPUT 5) again.
Connect with Component Video (YPbPr) Source
A. Operation Examples:
1. Via front panel buttons & OSD
Press
MENU
button on front panel to enter in OSD, and then enter in
OPTION
setting menu: set “INPUT 4 Select” to
YPbPr1
, and “INPUT 5 Select” to
YPbPr2
.
After setting, press
SOURCE/AUTO
button on front panel to switch to YPbPr1 or
YPbPr2 source.
2. Via RS232 commands
Send command
50681%
(or
50684%
) to switch to YPbPr1 (or YPbPr2) source.
3. Via IR remote & OSD
Press
MENU
button on IR remote to enter in OSD, and then enter in
OPTION
setting
menu: set “INPUT 4 Select” to
YPbPr1
, and “INPUT 5 Select” to
YPbPr2
.
After setting, press
INPUT 4
(or
INPUT 5
) button to switch to YPbPr1 (or YPbPr2)
source.
B. Connecting the VGA converting cable like this:
Connect with Composite Video (C-VIDEO) Source
A. Operation Examples:
1. Via front panel buttons & OSD
Press
MENU
button on front panel to enter in OSD, and then enter in
OPTION
setting menu: set “INPUT 4 Select” to
AV1
, and “INPUT 5 Select” to
AV2
. After
