Compact Scaler Switcher (with PoC)
24
a) When HDCP is set to active, whether output source is with HDCP depends on
input source. If the input source is with HDCP, so is the output and vice versa.
b) When HDCP is set to Manual, whether the output is with HDCP depends on the
statue of HDCP. Turn off HDCP, then the output is without HDCP and vice versa.
2. Screen output adjusting avails only when the screen output adjusting is on. Send
command 50678% to turn on.
3. CEC commands with grey background avails only when CEC is on.
4. MIC precedence: In Mute mode, if the MIC noise detecting is on, the device will
unmute MIC automatically given the outer noise exceeds the limit of noise detecting.
Send 50696% to enable MIC precedence, then the device will not be able to change
the mute mode no matter how loud the noise is.
4.4.4 Control MP-SC-5T or 3rd Party Device from Local
Firstly, connect the RS232 port of MP-SC-5T to RS232 port of PC.
Secondly, send command
50787%
(serial control mode 1, factory default) via RS232
communication software.
Lastly, send the right command of MP-SC-5T or other remote RS232 device connected
in present system. Connect as below:
Control MP-SC-5T or 3rd party device from local
