118
4.5.5.2.5 P2P
You can watch remote NVR live view in WAN by P2P on M-Sight Pro without doing port forwarding on
router.
Click “Enable” and “Save” to enable P2P.
P2P is enabled successfully when P2P Status shows “Activated”.
After enabling, you can add the NVR on the APP M-Sight Pro for live view via scanning the QR code on
the “P2P” page directly, or inputting the MAC address manually.
There are several status shows on P2P Status after clicking Saving, please check corresponded
possibilities below:
P2P Status
Description
Network unavailable
Failed to connect with internet
Authentication request failed
Failed to authenticate P2P encryption
No idle UUID
Please contact Milesight if this status shows up
Activated
P2P is available
Login failed
Failed to login P2P server
Initialization failed
Failed to initialize P2P
Unactivated
P2P is disabled
Unknown error
Other error
Note:
1. Please make sure that NVR is available for internet before enabling.
2. If your NVR firmware version is not 7x.7.0.9-r2 or above, please contact Milesight to registered
P2P first.
Summary of Contents for UI-1009-NA
Page 1: ...Network Video Recorder User Manual V5 02...
Page 12: ...12 4K H 265 PoE NVR Series UI 1009 PA UI 5016 PB UI 7032 PB...
Page 14: ...14...
Page 133: ...133...